Papa UNI V60 S42H 8,0 m2
Recommended products
Product description
Welded asphalt roofing felt UNI V60 S42H is made on the basis of a glass veil. Unmodified asphalt. The top side covered with coarse mineral sprinkles, the bottom side protected with plastic film. For use as a top layer in multilayer roofing on a rigid surface. It is not used as a single-layer cover, it is not intended for roofing for plant cultivation. Recommended for dimensionally stable roofs, not subject to vibration and settling.
Roofing felt UNI V60 S42H should be attached to the underfelt by welding, over the entire surface, with a longitudinal overlap of approx. 8 cm and a transverse overlap of approx. 12 cm. The outflow of coating mass, about 1 cm wide, indicates that the roofing felt is properly welded. Papa should be laid at a temperature above + 5oC, on a dry surface. In the case of low ambient temperatures, the roofing felt should be stored in heated rooms (approx. + 20oC) and carried out on the roof immediately before installation.
| lp |
properties
|
Requirements
|
|---|---|---|
| 1 | Warranty | 3 years |
| 2 | Destiny | top covering |
| 3 | Insert type | glass veil |
| 4 | Thickness mm / basis weight kg / m 2 | 4.2 ± 10% |
| 5 | Number of m in a roll | 7.5 |
| 6 | Low temperature flexibility | ≤ 0 ° C |
| 7 | Maximum tensile force along and across [N] | |
| - along [N] | (600 ± 150) N / 50mm | |
| - across [N] | (300 ± 100) N / 50mm | |
| 8 | Elongation at maximum tensile force | 4/4 ± 2% |
| 9 | Resistance to flow at elevated temperatures | ≥70 ° C |
| 10 | Tear resistance longitudinally across the nail | NPD |
| 11 | Mounting method | welding |
| 12 | Number of rolls on a pallet | 20 |
| 13 | Number m 2 on a pallet | 150 |
Have you purchased this product?