TFIX Facade dowel with driven plastic pin 8/175 mm..

Product description

Features and Benefits:

• The TFIX-8S-DEVICE thermal insulation perforating tip allows for automatic and precise deepening of the TFIX-8S plug in the thermal insulation layer.
• The thermal insulation layer of the plug integrated with the pin enriched with a unique material layer reduces thermal permeability and equalizes the drying time of the plaster at the anchoring point until the drying of the plaster outside the anchoring point.
• The unique pin compression zone ensures precise product application.
• Simple and ergonomic installation of the dowel in all substrate categories (A, B, C, D, E)
• Reduced point permeability of the TFIX-8ST connector (0.001-0.002W / K) due to the high steel spindle injection reduces heat loss on the facade
• The best parameters when using the anchoring zone reduced to 25mm
• The unique design of the anchoring zone allows the transfer of high loads limiting the number of anchorages recommended per m2
• The high rigidity of the plate (0.6 kN / mm) ensures the stability of the insulation system preventing vibration caused by wind suction forces
• Pre-assembled connector elements save time and work

Apps

• Facade insulation systems (ETICS)
• Styrofoam boards
• Mineral wool boards
• Polyurethane sheets

Installation instructions:

1. Drill a hole of suitable diameter and depth.
2. In A, B, C, D soils, the minimum drilling depth is 35mm, in E soil - 75mm aerated concrete.
3. Gently tap the plastic dowel with the hammer so that the perforator halfway (embossed line) sinks into the thermal insulation.
4. In soils of categories A, B, C, D, the minimum anchoring depth is 25mm, in soil E - aerated concrete 65mm.
5. After placing the dowel in the hole, the teeth of the KWX-63 perforating plate should be driven completely embedded in the insulation.