Tikkurila Finngard Color Facade Paint Tester Finngard Color Tester Base A 0.45L
Recommended products
Product description
Water-borne, matt, color tester for facade paints from the Finngard family. After the test, the surface should be painted with a topcoat.
ADVANTAGES AND FEATURES
• Perfectly reproduces color in a natural setting.
• Facilitates the selection / matching of colors to other elements of the building.
ADVANTAGES AND FEATURES
• Perfectly reproduces color in a natural setting.
• Facilitates the selection / matching of colors to other elements of the building.
Examples of use
Traditional lime-cement and cement plasters, thin-layer mineral-polymer plasters, acrylic plasters, fiber cement boards and concrete. Can be used on dispersion and mineral (silicate) coatings.
TECHNICAL DATA
4
m 2 / l
m 2 / l
8
m 2 / l
m 2 / l
Base
A and C.
colors
Colors from the Tikkurila Facade 760 pattern book and selected colors from NCS and RAL.
When choosing colors for facades, especially those exposed to intense sunlight, which can significantly heat this surface, we recommend using colors with a higher light reflection coefficient. The values of the light reflection coefficient are given in the Tikkurila Facade 760 card.
When choosing colors for facades, especially those exposed to intense sunlight, which can significantly heat this surface, we recommend using colors with a higher light reflection coefficient. The values of the light reflection coefficient are given in the Tikkurila Facade 760 card.
Efficiency
4-8 m2 / l with a single layer, depending on the absorbency and structure of the substrate, the method of application and the painting tool used.
Pack size
0.45 l
imposition
Roller, brush or matrix.
Drying time at 23 ° C and 50% relative humidity
At +23 ± 2 ° C, relative humidity 50 ± 5%, the coating dries for up to 2 hours. Apply another coat after min. 8 hours.
Drying and recoating times depend on the layer thickness, temperature and relative humidity.
Drying and recoating times depend on the layer thickness, temperature and relative humidity.
Technical data
The results obtained from the tests are average values. The natural resources used may have a slight effect on the actual values given in the table. The product quality and properties remain.
Solid content
Marking according to PN-EN ISO 3251: 2008P: approx. 40%
Density
Designation in accordance with PN-EN ISO 2811-1: 2012P: base A - approx. 1.35 kg / l, base C - approx. 1.27 kg / l
€1.81
/ pcs
€2.23
/ pcs
Świetna opinia
30 dni na zwrot!
Od 40 lat na rynku
Zakupy na termin!
Have you purchased this product?