Recommended products
Product description
Acrylic fulfilling the functions of priming anticorrosive primer coating and thixotropic enamel topcoat (2 in 1). It creates durable, matt coatings with high coverage, very good mechanical properties and excellent weather resistance.
- Primer and enamel in one.
- No primer on galvanized surfaces or other metal surfaces.
- Thixotropic formula.
- Excellent coverage.
- Short drying time.
- Very good adhesion to the ground.
- Excellent durability over time.
Primer is intended for direct, decorative and protective painting of steel, galvanized steel surfaces (it is recommended to paint seasoned galvanized surfaces), zinc, cast iron, aluminum, copper and metal alloys with small corrosion centers. It is especially recommended for painting roof coverings, gutters, fencing meshes, constructions and metallized substrates, used in atmospheric corrosivity categories: C1, C2, C3 (according to PN-EN ISO 12944-2). TIKKURILA MAKOR-TIX can be used to renovate paint coatings with good adhesion to the substrate, provided that a positive result is obtained after a trial application. The product can be used inside rooms not intended for permanent residence of people.
TECHNICAL DATA
7
m 2 / l
m 2 / l
9
m 2 / l
m 2 / l
colors
7 ready colors. Chocolate brown, red oxide, graphite, copper, metallic gray, cherry, dark green.
Efficiency
7-9 m 2 / l with one painting, depending on the structure of the surface to be painted and the painting tool used.
Pack size
1 l; 3 l; 10 years
imposition
A flat, soft brush or roller with short bristles, resistant to xylene. Airless spray - parameters:
1) The conventional viscosity measured with a conical bottom cup with a 6 mm hole diameter: 55-80 s
2) Nozzle diameter: 0.013 "-0.019"
3) Working nozzle pressure: 120-180 bar, the spray angle should be selected depending on the element to be painted
1) The conventional viscosity measured with a conical bottom cup with a 6 mm hole diameter: 55-80 s
2) Nozzle diameter: 0.013 "-0.019"
3) Working nozzle pressure: 120-180 bar, the spray angle should be selected depending on the element to be painted
Drying times
Drying time of the coating at + 20 ± 2 ° C and relative humidity of 55 ± 5%:
Dust dryness: 25 min
Tactile drying: 1.5 hours
Recommended dry layer thickness: 40-60 μm
Technical data
The conventional viscosity measured with a conical bottom cup with a 6 mm hole diameter: 55-80 s
Density
1.18-1.36 g / cm3
Storage
The product should be stored in tightly closed containers, at a temperature between + 5 ° C and + 25 ° C. Store in dry and ventilated rooms, away from sources of ignition.
€14.94
/ pcs
€18.37
/ pcs
Świetna opinia
30 dni na zwrot!
Od 40 lat na rynku
Zakupy na termin!
Have you purchased this product?