Recommended products
Product description
A water-borne acrylic paint for priming façades - strengthens the structure of the substrate, reduces and equalizes absorbency, uniforms the color, improves the adhesion of the facade paint and isolates the topcoat from the influence of factors from the substrate.
ADVANTAGES AND FEATURES
• Strengthens the substrate and improves the adhesion of facade paint.
• Uniforms the color of the painted surface thanks to the possibility of tinting.
• Reduces topcoat consumption.
• Has a wide spectrum of use, for various mineral substrates.
ADVANTAGES AND FEATURES
• Strengthens the substrate and improves the adhesion of facade paint.
• Uniforms the color of the painted surface thanks to the possibility of tinting.
• Reduces topcoat consumption.
• Has a wide spectrum of use, for various mineral substrates.
Examples of use
For use on traditional lime and cement screeds, thin-layer mineral-polymer and acrylic plasters and concrete substrates. It can also be used to renovate dispersion and mineral (silicate) coatings. The product is suitable for use inside the building for rooms not intended for permanent residence of people (e.g. garages, basements, warehouses, etc.).
TECHNICAL DATA
6
m 2 / l
m 2 / l
8
m 2 / l
m 2 / l
Base
AP
colors
Colors similar to the shades of Tikkurila facade paints from the Tikkurila Facade 760 pattern book and selected colors from NCS and RAL.
Due to the nature of the product, the color of the primer may differ from the one presented in the color palette. It is recommended to make an appropriate color test on an area of 1-2 m2.
Due to the nature of the product, the color of the primer may differ from the one presented in the color palette. It is recommended to make an appropriate color test on an area of 1-2 m2.
Gloss level
checkmate
Efficiency
6-8 m2 / l with one primer, depending on the absorbency and structure of the substrate, application method and painting tool used. Perform a test to determine the yield for a given substrate.
Pack size
2.7 l; 9 years
imposition
Roller, spray or brush.
Drying time at 23 ° C and 50% relative humidity
At +23 ± 2 ° C, with a relative humidity of 50 ± 5%, the coating dries about 5 hours.
Drying and recoating times depend on the layer thickness, temperature and relative humidity.
Drying and recoating times depend on the layer thickness, temperature and relative humidity.
Technical data
Physical properties according to PN-EN 1062-1 (2005):
The results obtained from the tests are average values. The natural resources used may have a slight effect on the actual values given in the table. The product quality and properties remain.
|
Technical parameter |
Designation according to with the norm |
Score |
|
Specular gloss G |
PN-EN ISO 2813: 2014-11 |
G3 material |
|
Steam penetration coefficient water / vapor permeability V g / (m 2 xd) |
PN-EN ISO 7783: 2012 |
V1 large |
The results obtained from the tests are average values. The natural resources used may have a slight effect on the actual values given in the table. The product quality and properties remain.
Density
Designation in accordance with PN-EN ISO 2811-1: 2016-04: approx. 1.25 - 1.35 kg / l
€33.67
/ pcs
€41.41
/ pcs
Świetna opinia
30 dni na zwrot!
Od 40 lat na rynku
Zakupy na termin!
Have you purchased this product?