Recommended products
Product description
Silicate, water-borne facade paint. For use on traditional lime-cement and lime plasters, thin-layer silicate and mineral-polymer plasters, sand-lime bricks and concrete surfaces as well as for renovation of silicate or lime paint coatings.
The paint is available on request.
ADVANTAGES AND FEATURES
• Creates extremely durable coatings due to the ability to bind to the substrate, retains color and protective properties for many years.
• Increases safety - non-flammable, classification A1 according to PN-EN 13501-1
• Ideal for painting "fresh" mineral plasters.
• Allows moisture away from the wall - vapor permeable.
• Highly resistant to fungi, mold and algae.
• Warranty 20 years of coating and color durability *.
* in accordance with the terms of the Guarantee Terms of Tikkurila Polska SA
The paint is available on request.
ADVANTAGES AND FEATURES
• Creates extremely durable coatings due to the ability to bind to the substrate, retains color and protective properties for many years.
• Increases safety - non-flammable, classification A1 according to PN-EN 13501-1
• Ideal for painting "fresh" mineral plasters.
• Allows moisture away from the wall - vapor permeable.
• Highly resistant to fungi, mold and algae.
• Warranty 20 years of coating and color durability *.
* in accordance with the terms of the Guarantee Terms of Tikkurila Polska SA
Examples of use
Tikkurila Finngard Silicate Solid is perfect for renovating mineral wool insulation systems and on weaker substrates. The product is suitable for use inside the building.
TECHNICAL DATA
3
m 2 / l
m 2 / l
5
m 2 / l
m 2 / l
Base
SA and SC
colors
Colors from the Tikkurila Facade 760 pattern book and selected colors from NCS and RAL.
It is recommended to make an appropriate color sample for 1-2 m2.
When choosing colors for facades, especially those exposed to intense sunlight, which can significantly heat this surface, we recommend using colors with a higher light reflection coefficient. We recommend using colors with a light reflection coefficient greater than 20%.
The values of the light reflection coefficient are given in the Tikkurila Facade 760 card.
It is recommended to make an appropriate color sample for 1-2 m2.
When choosing colors for facades, especially those exposed to intense sunlight, which can significantly heat this surface, we recommend using colors with a higher light reflection coefficient. We recommend using colors with a light reflection coefficient greater than 20%.
The values of the light reflection coefficient are given in the Tikkurila Facade 760 card.
Gloss level
checkmate
Efficiency
3-5 m 2 / l with a single layer, depending on the absorbency and structure of the substrate, the method of application and the painting tool used. Perform a test to determine the yield for a given substrate.
Pack size
2.7 l; 9 years
imposition
Roller, spray or brush.
Drying time at 23 ° C and 50% relative humidity
At +23 ± 2 ° C, relative humidity 50 ± 5%, the coating dries for up to 12 hours. Apply another coat after min. 12 hours.
Drying and recoating times depend on film thickness, temperature and relative humidity.
Drying and recoating times depend on film thickness, temperature and relative humidity.
Adhesion
Designation in accordance with PN-EN ISO 4624: 2016-05:> 0.8N / mm 2 .
Technical data
Physical properties according to PN-EN 1062-1 (2005):
The results obtained from the tests are average values. The natural resources used may have a slight effect on the actual values given in the table. The product quality and properties remain.
|
Technical parameter |
Designation according to with the norm |
Score |
|
Specular gloss G |
PN-EN ISO 2813: 2001P |
G3 material |
|
Coating thickness E µm |
PN-EN 1062-1: 2005P |
E2 50 <E2 = <100 |
|
Category of grain size S µm |
PN-EN ISO 1524: 2013: 06E |
S1 small |
|
Steam penetration coefficient water / vapor permeability V g / (m 2 xd) |
PN-EN ISO 7783-2: 2001P |
V1 large |
|
Water permeability / water absorption W kg / (m 2 xh 0.5 ) |
PN-EN 1062-3: 2008P |
W2 average |
|
Permeability of carbon dioxide C g / (m 2 xd) |
PN-EN 1062-6: 2003 |
C 0 |
The results obtained from the tests are average values. The natural resources used may have a slight effect on the actual values given in the table. The product quality and properties remain.
Solid content
Marking according to PN-EN ISO 3251: 2008: approx. 50%.
Density
Designation in accordance with PN-EN ISO 2811-1: 2016-04: approx. 1.4kg / l
€16.54
/ pcs
€20.34
/ pcs
Świetna opinia
30 dni na zwrot!
Od 40 lat na rynku
Zakupy na termin!
Have you purchased this product?